Online-Drip Laterals

• Diameter-12mm,16mm
• Working pressure range from 1.25kg/m2-2.5kg/m2
• Used for all kinds of micro irrigation systems such as drip or micro sprinklerr,micro prayer,jets, foggers etc.
• Directly connected to the sublines, protect from UV degradation for enhancing the life
• Excellent distribution uniformity.

Online-Drip Laterals

• Diameter-12mm,16mm
• Working pressure range from 1.25kg/m2-2.5kg/m2
• Used for all kinds of micro irrigation systems such as drip or micro sprinklerr,micro prayer,jets, foggers etc.
• Directly connected to the sublines, protect from UV degradation for enhancing the life
• Protect from UV degradation for enhancing the life]*Excellent distribution uniformity

Inline Drip Laterals

• Diameter-12mm,16mm
• Pressure rating-1.25kg/cm.sq,2.5kg/cm.sq
• Discharge- 2 lph-5 lph
• Turbulent water labyrinth ensures clog resistant emitter
• Excellent distribution uniformity.
• Protect from UV degradation for enhancing the life]*Excellent distribution uniformity

Online Drippers

• Easy to supply accurate quantity of water to the root zone of all crops
• Can be fited dirextly or with micro tube of laterals
• Normal Discharge rate available in 4 lit/hr and 8lit/hr
• Easy to open and clean

Drip Line Connectors

• Low discharge 60 Lph
• Radius-8 feet
• Operating pressure- 1.5 kg/cm sq
• Less labor/ higher distribution and fertigation efficiency

Flush Valve

• Available sizes- 40, 50, 63 & 90mm
• Upto 4kg/cm sq operating pressure
• Reduces deposit buildup in 1/2" and 3/4" distribution tube
• Flush valves reduce deposits buildup, open and close at low pressure
• It is used to clean the pipeline and maintain the fresh flow of water.

Ball Valve

• Easy to handle, install, maintenance
• Corrosion and weather resistant
• UV stabilized
• Available sizes- @", 2 1/2", 3"

End Cap

• Used to block the tail end of each lateral tube
• Normal size available are 12mm, 16mm and 20mm

Drill Bit

• Used for drilling holes on sub main pipes for fitting start and washer
• Normal size available are 12mm, 16mm
• Material of construction- M.S/Plastic

Punch Tool

• Used for punching holes on laterals for fitting different nozles and micro tubes
• Easy to operate

Air Release Valve

• To prevent infiltration of toxic substances into drip systems
• 4kg/ cm sq maximum operating temperature
• Prevents clogging and back siphoning in 1/2" and 3/4" distribution tubing

Drip End Cum Valve

• Sizes available are- 12mm, 16mm
• The tap can turn on or turn off to control the water flow
• There are chemical resistant gasket to easy turn on and Turn off

Ventury Manifold

• Used for applying liquid fertilization through drip or sprinkler Irrigation systems
• Available Size- 1", 1 1/2", 2", 2 1/2"
• Uniform application of fertilizers or chemicals
• Save energy and man power
• Improve fertilizers appluication efficiency

Drip Irrigation